// DALLAS COUNTY

Long-Travel Suspension Conversions in Dallas, TX

Long-Travel Suspension Conversions by Texas Motorworx serving Dallas, TX and the broader DFW metro. Long-travel suspension is the conversion that transforms a fast factory truck into a race-grade desert truck. Texas Motorworx specializes in long-travel programs for Ford Raptor (Gen 2 and Gen 3), Bronco Raptor, Ram TRX, and Toyota Tundra/Tacoma platforms. A long-travel build replaces the stamped factory upper and lower control arms with billet/tubular pieces that move the upper ball joint outboard, then mounts new King 3.0 race-series coilovers in a relocated upper bracket. The result: 14"–16" of front travel (up from 10"–13" factory) and a chassis that finally lets the wheels work over rough terrain. Most long-travel builds run $30K–$80K and complete in 8 to 14 weeks.

Start Your Build Call (214) 785-6568
SERVING DALLAS

Dallas, TX Customer Notes

Texas Motorworx is headquartered at 11419 Ferrell Dr, Suite 104 in Dallas, TX — a 12,000 sqft facility on the Farmers Branch / North Dallas line. Dallas customers drop trucks off without scheduling transport, and most prefer to pick up finished builds in person rather than have them shipped. The shop is roughly 20 minutes from downtown Dallas, 25 from Uptown, and 5 from the LBJ Freeway interchange.

Dallas truck culture has shifted dramatically in the last five years toward serious off-road capability rather than show builds. The DFW market — Dallas plus Plano, Frisco, and Fort Worth — is one of the strongest Ford Raptor and Bronco markets in the country, and the buyer tends to want a truck that can actually run West Texas back roads on a weekend, not just look the part on Lemmon Avenue.

We work with Dallas customers in three modes: full custom build (8–16 weeks in our shop), suspension-only refresh (4–6 weeks), and parts-and-install for customers bringing components from elsewhere. Local Dallas customers can stop by during the build for in-person walkthroughs, which we encourage on bigger programs.

Dallas is also the home of our SPEC TT/6100 race program. Local customers occasionally tag along to BITD events when schedules allow, and the shop runs an open house once a year in late spring where we show the race truck alongside finished customer builds.

WHY DALLAS BUILDERS CHOOSE TMX

The Texas Motorworx Difference

  • Founded 2012 by mechanical engineers Jason Cook and Sam Bryce — engineering-led every build.

  • 12,000 sqft Farmers Branch facility — every install, fab, and alignment done in-house.

  • 500+ custom trucks delivered. SPEC TT/6100 race team in BITD with calibration that carries over to customer builds.

  • Authorized dealer for Carli, King, ICON, FOX, Baja Designs, Method, ADD, SVC, Camburg, Total Chaos, and 30+ more.

  • Fixed-price quotes. Weekly photo updates. No mid-build surprises.

  • Dallas, TX treated as a local customer — drop-off, walk-throughs, and pickup as easy as the Dallas-locals.

HOW IT WORKS

From Concept to Keys

01

Long-travel readiness audit

Not every truck is a candidate. We start by inspecting the chassis, drivetrain, and intended use to confirm long-travel is the right path.

02

Kit selection & quote

SVC GenX, Camburg KINETIK, Total Chaos — the right kit is platform-specific. Fixed quote and timeline.

03

Teardown & install

Factory uppers, lowers, and shocks come off. New billet/tubular arms, new shocks, new geometry — installed in our 12,000 sqft Farmers Branch facility.

04

Rear-axle calibration

Front travel only solves half the problem. Custom Deaver leaf packs and matched rear bypass shocks let the rear axle keep up with the new front capability.

05

Race-program calibration & delivery

Final shock tuning calibrated against feedback from our SPEC TT/6100 race truck running the Best In the Desert series.

DRIVE TIME FROM DALLAS

0 Minutes to TMX

Dallas, TX customers drive to the Texas Motorworx shop at 11419 Ferrell Dr, Suite 104, Dallas, TX 75234 in approximately 0 minutes — most use US-75, the Dallas North Tollway, or I-30 depending on origin.

Local customers can drop their truck off and Uber home, schedule milestone walkthroughs during the build, and pick up the finished truck in person. We can also coordinate enclosed transport for Dallas customers who prefer it.

// SHOP LOCATION
ADDRESS
11419 Ferrell Dr
Suite 104
Dallas, TX 75234
QUESTIONS

Dallas Customer FAQs

How long does a long-travel suspension conversions take from Dallas, TX?
Most long-travel suspension conversions programs at Texas Motorworx run between 4 and 16 weeks from deposit to delivery, depending on platform and scope. Dallas, TX is approximately 0 minutes from our Dallas shop, so most Dallas customers drop their truck off in person and pick up the same way. Long-lead parts (Carli leaf packs, SVC GenX kits) can extend timelines by 2 to 4 weeks.
Do I need to drive to Dallas, or can you ship my Dallas truck?
Both options work. Most Dallas, TX customers drive in directly — the trip is short enough that an Uber back is the easiest option. We also coordinate enclosed transport for Dallas customers who prefer it. Communication is the same either way: weekly photo updates, milestone walkthroughs scheduled around your timeline.
How much does a long-travel suspension conversions cost in Dallas?
Pricing for long-travel suspension conversions at Texas Motorworx is the same for Dallas customers as for Dallas customers — there's no geographic markup. Programs typically start around $30,000 and scale up based on the parts list and scope. Every quote is fixed-price up front.
Are you Dallas's authorized Carli, King, ICON, FOX, or Baja Designs dealer?
Yes. Texas Motorworx serves Dallas, TX as an authorized dealer and installer for Carli Suspension, King Shocks, ICON Vehicle Dynamics, FOX Offroad, Baja Designs, Method Race Wheels, ADD, SVC Offroad, Camburg, and 30+ other premium off-road brands. Dallas customers get the same factory-trained installation and dealer warranty support as our Dallas-local customers.
Why should Dallas customers choose Texas Motorworx?
Texas Motorworx has built over 500 custom trucks since 2012 from our 12,000 sqft Farmers Branch facility. We're founded by mechanical engineers, we run a SPEC TT/6100 race truck in Best In the Desert, and our calibration carries over to every customer build. Dallas is close enough that you can stop by during the build for in-person walkthroughs, and you're treated as a local customer regardless.

Build your truck. Dallas's closest race-credible shop.

Dallas, TX is 0 minutes away. Schedule a vision call — free, no commitment.

Start Your Build Or call (214) 785-6568
Call (214) 785-6568 Start Your Build